Australia Bathroom Vanity Sizes: Planning 600, 750, 900 and 1200 mm Ranges
Australian ranges commonly use nominal millimetre widths, but the exact cabinet, benchtop and basin dimensions determine fit. A useful product schedule also records plumbing, drawer or door travel, wall fixing, storage, site access and every supplied component.
Choose the width class for the room and channel
| Nominal class | Typical range role | What to verify |
|---|---|---|
| 600 mm | Compact ensuites and apartments | Basin usability, trap and drawer clearance |
| 750 mm | Compact-to-medium single-basin ranges | Actual body width, benchtop and wall tolerance |
| 900 mm | Main-bathroom single-basin programs | Basin offset, storage and plumbing zone |
| 1200 mm | Large single or double-basin layouts | Basin count, support, tap centres and delivery access |
These are range-planning classes. Confirm the exact selected model before drawing approval, online claims or bulk ordering.
Coordinate the vanity with the room
Benchtop and basin
State whether they are included and list each actual dimension. A top or basin can project beyond the cabinet body and change the required wall space.
Plumbing and drawers
Map the waste, trap and valves against drawer boxes and shelves. A photograph cannot prove the internal service clearance.
Wall-hung installation
Confirm substrate, reinforcement, fixing rail or brackets, fasteners and installer responsibility. The project professional must assess the specific wall and loads.
Shaving cabinet alignment
Coordinate vanity centreline, basin, tapware, shaving cabinet width, door travel, lighting and electrical services before room replication.
Exact-model references for an Australian shortlist
Laguna Mark II 600 mm
The record distinguishes the nominal width from a 590 × 550 × 460 mm cabinet.
Byron 750 mm
The exact cabinet record is 740 W × 460 D × 550 H mm with model-bound finish and hardware details.
Hampshire 1200 mm
Review exact dimensions, supplied components and project suitability through the current model page and quotation.
Australian project and wholesale checklist
- Nominal width plus exact cabinet, top and basin dimensions.
- Room type, quantities, states or territories and installation route.
- Panel material, finish reference and sample approval.
- Plumbing zone, storage and open-door or drawer clearance.
- Wall construction, reinforcement, fasteners and installation responsibility.
- Shaving cabinet, mirror, lighting and electrical coordination.
- Packaging, ISPM 15 timber packaging where applicable, spares and staged delivery.
Frequently asked questions
Is a nominal 900 mm vanity always 900 mm wide?
No. The cabinet body can be below the nominal class, while the benchtop or basin can set another envelope. Use the exact drawing.
Should the vanity and shaving cabinet be the same width?
Not necessarily. Align them according to the room, basin, tapware, lighting, door travel and design intent rather than a blanket width rule.
Send an Australian range brief
Review boundary: model dimensions, materials, supplied components and destination obligations are confirmed only through the selected product file and quotation.